
- 1. 134 KB Binary STL Pack Instead of a 24 GB VRAM Workstation Boot: Rather than downloading multi-gigabyte USD scenes or streaming laggy cloud WebRTC video, tamp.mincasurong.com packs decimated binary STL link meshes (
link0..7.stlandhand.stl, 134 KB total), clones Three.jsBufferGeometryacross up to 22 FR3 arms, boots in under 400 ms, and holds 60 FPS on laptops and mobile browsers. - 2. Sub-25 ms TypeScript 7-DoF DLS IK and 128 Hz Swept-Capsule Gate:
fr3Kinematics.tssolves 150-iteration 7-DoF DLS IK in under25 msusing Craig Modified Denavit-Hartenberg Forward Kinematics and an analytical 6×7 Geometric Jacobian (damping0.02, null-space posture weight0.05). A 128 Hz swept-capsule gate checks every trajectory before execution and spawns a translucent red 3D ghost arm at any rejected pose. - 3. Sub-60 ms 8-Slot (
s0..s7) Lazy-DaSH Replanning Across Three Modes: Toggling any of the 8 peripheral workcell slots triggers TypeScript Lazy-DaSH replanning in 27.1 to 34.7 ms across Mode 1 (6-Block Tower: 9.52 s at 2 arms → 7.97 s at 3 arms → 6.56 s at 4 arms in 30.8 ms), Mode 2 (Bimanual LongBar & Conveyor: 4 arms in 5.37 s with 2 conflict repairs in 27.1 ms), and Mode 3 (Deformable Cloth: catching 2-arm1_IK_UNREACHABLEat the 0.910 m pin beyond 0.805 m reach and recovering in 34.7 ms at 7.91 s once slots6is enabled). - 4. Elevated
Z = +0.02 mAMR Turret Docking,Z = -0.52 mFloor Clearance, andResizeObserverHypergraph UI: Across the 6-cell, 18-FR3, and 4-AMR (MM0..MM3) smart factory running at 720.0 units/h, depressing the floor toZ = -0.52 mand raising each AMR turret base toZ = +0.02 meliminates Z-fighting and table-apron collisions, while pointer-captured split resizers and aResizeObserverscale the Execution Hypergraph and Gantt timeline without label clipping.
Fetches link0..7.stl and hand.stl (134 KB total) once and clones BufferGeometry across 8 workcell slots or 22 factory FR3 arms.
Solves 150-iteration Gaussian Elimination DLS IK (damping 0.02, posture weight 0.05) and checks 128 Hz swept link capsules before motion.
Repairs frontier collisions, bimanual promotions, and unreachable cloth pins well under the 60 ms interactive budget across Modes 1–3.
Docks MM0..MM3 turrets at Z = +0.02 m over a Z = -0.52 m floor while scaling Hypergraph and Gantt panes via ResizeObserver.
1. Replacing a 24 GB VRAM Workstation Boot with a 134 KB Binary STL Pack at 60 FPS
Desktop robotics simulators block instant browser verification. Our workstation stack in IsaacSim_Gemini runs NVIDIA Isaac Sim 6.0 (Omniverse Kit and 240 Hz PhysX 5 tensors) alongside WSL2 ROS 2 Jazzy, MoveIt 2, and MuJoCo 3.x. That setup requires an RTX 3090 or 4090 GPU with 16 to 24 GB of VRAM, 45 to 90 seconds of cold boot time, and more than 4.5 GB of USD assets. Reviewers on standard laptops or tablets cannot run it locally.
Server-side Omniverse WebRTC pixel streaming moves that GPU bill to the cloud while adding session queues, video compression blur, and round-trip input lag on every camera orbit or slot click. Instead, https://tamp.mincasurong.com runs fast_sim_web 100% client-side in WebGL at a locked 60 FPS:
- Decimated Binary STL Pack (
134 KBTotal): Uncompressed CAD and URDF visual meshes for a 7-DoF Franka Emika FR3 arm and parallel-jaw hand take 18 to 35 MB per robot. Offline mesh decimation and binary packing compress all nine rigid bodies (link0.stlthroughlink7.stlplushand.stl) into a single 134 KB payload while preserving joint collars, wrist flanges, and finger pads. - Single-Fetch
BufferGeometryCloning: Whether a user enables 2 workcell arms or spawns all 22 FR3 manipulators (18 cell arms plus 4 AMR-mounted arms) in the Smart Factory, the browser downloads the 134 KB binary buffer once and clones Three.jsBufferGeometryinstances across every kinematic chain. - Sub-400 ms Cold Boot and Locked 60 FPS Loop: Separating high-rate joint interpolation from material and shadow allocation brings cold boot under 400 ms and maintains 60 FPS orbit, pan, and zoom across desktop and mobile GPUs.

2. Single-Threaded 7-DoF MDH Kinematics, Sub-25 ms DLS IK, and the 128 Hz Swept-Capsule Gate
Browsers run UI and WebGL rendering on one main thread without native C++ MoveIt 2, KDL, or CUDA cuRobo bindings. If an inverse-kinematics solver stalls for 100 ms or allocates thousands of temporary matrices per frame, garbage-collection pauses drop the viewport below 60 FPS. Conversely, simplified 3-DoF planar approximations miss 7-DoF elbow redundancy, wrist singularities, and URDF joint-limit saturations on the Franka FR3.
In tamp.mincasurong.com, fr3Kinematics.ts solves 150-iteration 7-DoF DLS IK in under 25 ms with pre-allocated typed arrays and pairs directly with a 128 Hz swept-capsule collision gate:
d1 = 0.333 m, d3 = 0.316 m, d5 = 0.384 m, a4 = +0.0825 m, a5 = -0.0825 m, a7 = 0.088 m, flange offset 0.107 m) to compute all seven joint frames and the end-effector tool center point (TCP).fr3Kinematics.ts solves the 6×6 damped normal system (lambda = 0.02) with a null-space posture term (weight 0.05 toward upright home), converging to sub-millimeter TCP error within 150 iterations in under 25 ms while clamping all seven joints to FR3 URDF bounds.128 Hz, computes analytical capsule-to-capsule and capsule-to-AABB clearances across all links, emits deterministic fault codes (IK_UNREACHABLE, WORKSPACE_COLLISION, BIMANUAL_PROMOTION_REQUIRED), and spawns a translucent red 3D ghost manipulator at the exact rejected pose.- Null-Space Posture Regularization Prevents Elbow Drift: Without the
0.05null-space pull toward the elbow-up home posture, minimum-norm 7-DoF updates drift into low-elbow configurations over multi-step pick-and-place sequences and clip the table edge. - 3D Red Ghost Inspector for Pre-Dispatch Faults: When the 128 Hz gate blocks a move, such as two arms entering the central handover zone together or one arm reaching past its kinematic envelope, tamp.mincasurong.com freezes a translucent red 3D ghost arm at the exact collision or reach-limit configuration alongside the structured fault certificate.
3. Sub-60 ms 8-Slot (s0..s7) Lazy-DaSH Replanning Across Tower, LongBar, and Deformable Cloth
In the interactive workcell at tamp.mincasurong.com, users toggle any subset of 8 peripheral mounting slots (s0..s7), drop workspace obstacles, and switch across three manipulation modes. Rebuilding a coupled motion graph from scratch on every click would stall the browser.
Running UIUC Parasol Lab's Lazy-DaSH (Lee et al., IEEE T-RO) task-space hypergraph search and branch-scoped conflict repair in TypeScript keeps full multi-arm replanning between 27.1 ms and 34.7 ms, staying well inside our 60 ms interactive budget:
| Workcell Mode | Active Slot & Arm Topology | Physical & Kinematic Constraint Tested | Verified Makespan & Lazy-DaSH Replan Time |
|---|---|---|---|
| Mode 1: 6-Block Cooperative Tower | Scales live across 2 Arms → 3 Arms → 4 Arms on slots s0..s7 |
Strict vertical stacking order at the central tower goal with spatio-temporal mutex locking across concurrent outer-table picks and central placements. | Makespan drops from 9.52 s (2 arms) → 7.97 s (3 arms) → 6.56 s (4 arms); full hypergraph schedule and conflict check finishes in 30.8 ms. |
| Mode 2: Bimanual LongBar & Moving Conveyor | 4 Arms cooperative cell with live belt pickup | Emits BIMANUAL_PROMOTION_REQUIRED if one arm attempts a solo lift on the high-moment LongBar; locks dual-arm grasp keyframes while clearing belt blockers. |
Completes synchronized dual-arm lift and blocker clearance in 5.37 s makespan, resolving 2 conflict repairs in 27.1 ms. |
| Mode 3: Deformable Cloth Unfold, Fold & Handover | 2 Arms (Halt) → 3+ Arms with Slot s6 Enabled |
Pin-and-pull unfolding requires holding a far cloth corner at 0.910 m radius, exceeding the 2-arm kinematic reach limit of 0.805 m. |
2-arm Gate halts with 1_IK_UNREACHABLE (0.910 m > 0.805 m); enabling slot s6 replans in 34.7 ms and completes the fold and handover in 7.91 s. |
4. Smart Factory Clearance: Elevated Z = +0.02 m AMR Turrets and Z = -0.52 m Floor Datum at 720.0 units/h
Scaling tamp.mincasurong.com from one 8-slot table to a 6-Cell Smart Factory with 18 cell-mounted FR3 arms (3 per cell across 6 cells), 4 autonomous mobile manipulators (MM0..MM3), 3-tier AS/RS storage racks, and a roller shipping dock exposed three geometric failures at once.
In early builds, co-planar floor and pedestal meshes caused depth-buffer Z-fighting, low-slung AMR arms clipped table aprons with Link 1 and Link 2 during reach-in, and crowded racks blocked aisle sightlines. Five geometric invariants eliminated all three issues and locked throughput at 720.0 units/h:
Z = -0.52 m): Sets the global factory floor and AMR travel aisles at Z = -0.52 m relative to the workcell tabletop datum (Z = 0.00 m), ending depth-buffer Z-fighting between AMR wheels, cell pedestals, and table legs.Z = +0.02 m Base Flange): Mounts a vertical turret column on each mobile base (MM0..MM3) so the FR3 link0 flange sits at Z = +0.02 m above the tabletop, matching the downward reach-in clearance of table-mounted arms.MM0..MM3 and compact 3-tier racks), clearing aisle sightlines while sustaining 720.0 units/h (60.0 s makespan across 12 multi-stage orders).5. Split-Pane Telemetry Dock and ResizeObserver Execution Hypergraph Scaling
Inspecting a multi-arm planner requires more than a 3D camera. Alongside the WebGL scene, tamp.mincasurong.com streams the Execution Hypergraph (task vertices, active composite hyperarcs, and branch-scoped repairs), the Multi-Arm Spatio-Temporal Gantt Timeline, and the Deterministic Safety Gate Log in real time.
Fixed CSS grids clip SVG node labels and collide timeline bars when a 4-to-22 robot Gantt chart shares a laptop screen with a 3D viewport. Two layout mechanisms keep every pane legible during live 60 FPS playback:
- Pointer-Captured Split Resizers (
.resizer-h,.resizer-v-inner,.resizer-v): Drag handles between the 3D WebGL canvas, control sidebar, Execution Hypergraph pane, and bottom Gantt dock capture pointer events and clamp flex ratios within safe minimum and maximum bounds. ResizeObserverNode and Typography Scaling: A dedicatedResizeObserverwatches the pixel width and height of the Execution Hypergraph and Gantt containers on every drag frame, scaling SVG node radii, edge stroke widths, andclamp()font sizes proportionally so state labels and timeline bars never clip or overlap.
| System Dimension | Workstation Isaac Sim 6.0 + ROS 2 / MoveIt 2 | Cloud GPU WebRTC Streaming | tamp.mincasurong.com (fast_sim_web Lite-Sim) |
|---|---|---|---|
| Hardware & VRAM Requirement | NVIDIA RTX 3090 or 4090 (16–24 GB VRAM) + 64 GB RAM + Ubuntu / WSL2 | Dedicated cloud GPU node ($1.50–$4.00/h per active viewer) | 0 Install · Any Laptop, Tablet, or Mobile Browser (Standard WebGL) |
| Asset Payload & Cold Boot | 4.5+ GB USD & URDF assets · 45–90 s simulator boot | 15–30 s container spin-up + WebRTC handshake delay | 134 KB Binary STL Pack (link0..7.stl, hand.stl) · < 400 ms Boot |
| Kinematics & Safety Gate | C++ MoveIt 2 / CUDA cuRobo + Python stamp_gate |
Server-bound ROS 2 node (network round-trip on every drag) | TypeScript 7-DoF MDH FK + 6×7 DLS IK (<25 ms in fr3Kinematics.ts) + 128 Hz Capsule Gate |
| Workcell & Factory Modes | Separate Python launch files per workcell or MuJoCo batch | Single fixed scene per stream session | 8-Slot Workcell (Modes 1–3) + 6-Cell Smart Factory (18 FR3 + 4 AMRs at 720.0 units/h) |
| Telemetry & Hypergraph UI | External RViz2, Foxglove, or matplotlib windows | Baked into compressed video stream (non-interactive text) | Draggable Split Dock (.resizer-h, .resizer-v-inner) + ResizeObserver Hypergraph & Gantt |
6. References, Live Deployment & Related M9G Reports
- Live Production Simulator (
fast_sim_web): Minsu Chang, Ph.D., "M9G 3D Multi-Robot TAMP & 6-Cell Smart Factory Lite-Sim," deployed live at https://tamp.mincasurong.com (2026). - Lazy-DaSH (M9G-TR-2026-05 & IEEE T-RO): Seongwon Lee, James Motes, Isaac Ngui, Marco Morales, and Nancy M. Amato (UIUC Parasol Lab), "Lazy-DaSH: Lazy Approach for Hypergraph-based Multi-Robot Task and Motion Planning," IEEE Transactions on Robotics (T-RO), arXiv:2504.05552; see also M9G-TR-2026-05.
- Project STAMP (M9G-TR-2026-03): Minsu Chang, Ph.D., "Project STAMP: Decoupling Multimodal VLA Reasoning from Robot Execution via Deterministic Pre-Dispatch Gating and Fault Write-Back," M9G-TR-2026-03 (2026).
- Multi-Robot Assembly, Deformables & Self-Driving Labs (M9G-TR-2026-04): Minsu Chang, Ph.D., "Multi-Robot Manipulation in NVIDIA Isaac Sim (2025–2026): Cooperative Assembly, Deformable Handling, and Self-Driving Labs," M9G-TR-2026-04 (2026).
- Symbolic 3D Grounding & Software-Pipelined VLA Task Planning (M9G-TR-2026-01): Minsu Chang, Ph.D., "Symbolic 3D Grounding and Software-Pipelined VLA Task Planning: ER-2 vs. Gemini 4 Carbon," M9G-TR-2026-01 (2026).
- Franka Emika FR3 Kinematics & Craig Modified DH Convention: J. J. Craig, Introduction to Robotics: Mechanics and Control, 4th ed., Pearson, 2017; Franka Robotics FR3 URDF & DH Specification.
This technical report (M9G-TR-2026-06) documents the client-side WebGL architecture, TypeScript 7-DoF Modified DH and 6×7 Geometric Jacobian DLS IK solver in fr3Kinematics.ts, 128 Hz swept-capsule safety gate, Lazy-DaSH hypergraph replanner, and 6-Cell Smart Factory clearance engineering deployed at https://tamp.mincasurong.com.